• *外壓:
    4.0MPa(400m水深)
  • *抗拉強度:
    60噸以上
  • *單根長度:
    2000m
  • *輸送介質:
    油、氣、水均可
  • *最小彎曲半徑:
    2m
  • *施工:
    動力滾筒+駁船,不需大型定位裝置
  • 海洋柔性立管

  • 海洋柔性立管..

 

產品規格列表

step1: Preliminary selects the material and the type of structure, according to customer’s requirement, such as the application of water depth, component of transmission medium, temperature, internal pressure, ocean wave and tide etc.
step2: Design and analysis of the section based on the index proposed by the customer, and then determine the preliminary dimension of section, including thickness of each layer, analysis of the section properties and make the section meet the requirement of design index.
step3: Overall design and analysis, mainly including static and dynamic analysis under environmental load.
step4: Detailed design, in the application design, it needs to analysis the stress and deformation of the section under the corresponding load, ensure the safety of each layer and the whole, the other, also including the design of joint, bending restrictor and other auxiliary components and the analysis of fatigue life.
step5: After modeling analysis is qualified, carry out the sample pipe test, carry out full-scale test for the sample pipe to examine the design and verify the using safety.
Note:We can design and produce various size of flexible composite pipe according to the customer’s particular requirements for different working conditions.
江淮安徽麻将挂多少钱
贵州十一选五任五遗漏数据 北京快3走势图 股票配资推荐就择卓信宝配资 湖北十一选五遗漏走势图 重庆时时彩真能稳赚吗 玩北京pk赛车方法 山西快乐10分钟投注 最好的赚钱的视频软件 北京11选5 算法